You are currently viewing B63

B63

  • Post author:
  • Post published:
  • Post category:20 Feet

The Boomerang 20 has long been one of Australia’s most memorable trailer sailers alongside the Hartley TS16. Since its introduction in 1968, it served as a popular entry point for trailer yachting and a stepping stone toward larger keelboats, largely thanks to its low cost, easy trailering, low maintenance, and efficient rig. However, the rise of lightweight, radically shaped modern racing trailer yachts left the original Boomerang looking outdated. Additionally, builder Graham Proud of Boomerang Yachts faced manufacturing challenges as the original timber-derived deck mould was virtually worn out. In early 1986, the builder launched the B63, a substantially updated boat that retained the proven, successful hull design to avoid unnecessary costs while introducing a completely redesigned deck, cabin, and rig.

The most noticeable improvement in the B63 is its modern, sleek cabin top featuring integrated flush-fitting Perspex windows. This redesign allowed for a larger, stronger standard pop-top roof that provides full headroom when opened without spoiling the boat’s aesthetic lines. Although the cockpit maintains its original footprint, comfortably seating four adults, it was moved aft slightly by eliminating the old transom seat that previously housed the drop-keel winch mechanism. Keel operation is now handled by a 3:1 pulley system positioned directly over the keel, with the tail rope running along the cabin ceiling so it can be easily adjusted and cleated directly from the cockpit. Raising the 120 kg keel is remarkably smooth due to a Teflon casing plate and a moulded hull lip for structural guidance.

While retaining the original hull location and dimensions of the Boomerang 20 keel, the B63 features an upgraded aerofoil-shaped drop keel for superior windward performance. The keel itself is lighter, with additional ballast distributed in the bilge on either side of the casing. Although overall displacement remains at 940 kg (690 kg boat weight and 250 kg ballast), total ballast was increased by 40 kg. Internally, the boat emphasizes practical value with a simple layout featuring bunk cushions, teak storm boards, a step, and a compression post. Optional additions include a one-piece moulded galley unit that could be positioned to suit the buyer, and they could choose between a standard drop-leaf table or a horseshoe-shaped table attached to the keel case. Removing interior bulkheads and shifting the cockpit aft expanded cabin space, allowing a family of four to sleep comfortably with quarter berths extending beneath the cockpit floor, alongside provision for a portable toilet under the forward V-berth cushion.

Significant modernizations were also made to the standing and running rigging. The B63 uses a fractional 7/8 rig with a larger mainsail of 11.6 square meters, achieved via a longer boom and an increased luff length. The headsail area was reduced to 7.2 square meters, and the No. 1 genoa was resized to 11.1 square meters. The mainsail control features a 4:1 sheet ratio and an innovative removable traveller track that keeps the cockpit clear when anchored. Rigging setup is managed by two cockpit coaming winches used for headsails and halyards, enabling easy mast erection by two people. The coamings were widened and raised for better spray protection and seating support, while the foredeck features moulded non-slip surfaces, teak handrails, an open layout, and a large forward hatch suited for sail changes and anchor storage. On the water, the B63 demonstrates predictable and stable handling even in stormy or gusty conditions, making it an ideal choice for dual-handed sailing or family outings, while early racing results indicate it consistently outperforms older Boomerang 20 models.

SPECIFICATIONS

* Length Overall (LOA): 6.3 m

* Length Waterline (LWL): 5.73 m

* Beam: 2.2 m

* Draft (Keel Up): 0.3 m

* Draft (Keel Down): 1.3 m

* Hull/Boat Weight: 690 kg

* Ballast Weight: 250 kg

* Total Displacement: 940 kg

* Mast Length: 7.62 m

* Mainsail Area: 11.6 m²

* Headsail Area: 7.2 m²

* No. 1 Genoa Area: 11.1 m²

* Rig Type: 7/8 Fractional

Source: John Crawford Marine. “B63” Trailer Sailer Library. Accessed October 21, 2026. https://www.johncrawfordmarine.com.au/advice/trailer-sailer/b63-revised-boomerang-20

Historical photograph reproduced for identification and historical research purposes. Copyright remains with the original rights holder.

Quick tip: Keep in mind that trailer sailers can vary quite a bit, even within the same class. Take the RL28, for example: they might not all have outboard wells as designed. Some originally may have had inboard engines, and when those were removed, the owners swapped them for a standard outboard mounted on the stern.