You are currently viewing Spyder 24

Spyder 24

  • Post author:
  • Post published:
  • Post category:24 Feet

The Super Spyder 24 (MK I), was presented as a high-end trailer sailer designed by Gunner Heuchmer, a builder and sailor known for competing in major ocean races like the Sydney to Hobart. Named after Heuchmer’s favourite European sports car, the boat was engineered to blend high performance, distinct aesthetic styling, and cruise-ready comfort. The design features a fine entry, early rocker, a long straight run aft, and a raised chine that enhances helm control when under a spinnaker. Built with a balsa core and stitched glass fabric for high strength-to-weight ratio, it includes bonded furniture mouldings and a leather-look fibreglass headliner for increased structural rigidity. While these premium tooling methods, along with an aluminium toe rail, resulted in a high manufacturing cost of around $120,000 for the moulds, they also contributed to the boat’s high initial retail price of over $52,000.

On the interior, the Spyder 24 offers generous accommodations for a boat of its size, particularly when the large pop-top roof is raised to provide up to two meters of headroom. The layout includes a complete galley equipped with a top-of-the-line Swedish alcohol stove, a small sink, cutlery storage, an integrated icebox within the entry step, and a removable folding table. Sleeping accommodations comfortably suit four adults using two single quarter berths and a double V-berth in the bow, alongside a hanging locker and space for a chemical toilet. High-quality carpet and soft cushion fabrics contribute to a luxurious cabin ambience, reflecting a design intended for performance-minded families rather than stripped-down racers.

During on-water testing in Sydney Harbor in 15 to 20 knot breeze conditions, the boat demonstrated rapid acceleration, dinghy-like responsiveness, and strong tracking stability. Equipped with high-aspect Southside sails, a full-batten mainsail, and a self-tacking jib on a curved track, the Spyder handled cleanly under sail. Raising the large 37.44 square meter masthead spinnaker quickly propelled the boat onto a plane with light, positive helm response and no tendency to broach even when running off-wind. The rig setup allows for rapid rigging in about 20 to 30 minutes, featuring an 8:1 forestay tensioning purchase inside the anchor well, twin swept-back spreaders requiring no backstay or runners, and an un-stayed hinge system for easy single-handed mast stepping. Auxiliary power is provided by a 9 hp outboard mounted on an innovative internal bracket that retracts into a cockpit locker when not in use. Ultimately, the review praises the vessel as an exceptional, high-quality thoroughbred whose primary limitation is its high price point relative to the market (Rothfield, Mark).

Specifications:

* Length Overall (LOA): 7.30 m (24 ft)

* Beam: 2.50 m

* Draft (Keel Raised): 0.43 m (43 cm)

* Draft (Keel Lowered): 1.80 m

* Total Displacement: 920 kg

* Ballast: 310 kg

* Designer: Gunner Heuchmer

* Builder: Yacht Designs of Australia / Gold Coast & Ballina

* Retail Price: Over $52,000 AUD (plus freight) (At time of test, 1989)

Source: John Crawford Marine. “Spyder 24: Porsche Pedigree” Trailer Sailer Library. Accessed November 6, 2026.

https://www.johncrawfordmarine.com.au/advice/trailer-sailer/spyder-24

Photograph reproduced for identification and historical research purposes. Copyright remains with the original rights holder.

Quick tip: Keep in mind that trailer sailers can vary quite a bit, even within the same class. Take the RL28, for example: they might not all have outboard wells as designed. Some originally may have had inboard engines, and when those were removed, the owners swapped them for a standard outboard mounted on the stern (Hill, James).