The Hunter 25, manufactured by Hunter Marine Corporation in Alachua, Florida, is designed as an upgraded successor to the company’s popular Hunter 24 model. As the largest trailerable sailboat in Hunter’s lineup, it incorporates a fixed shoal keel design that contributes significantly to its overall performance and handling. Keel ballast accounts for 35 percent of the vessel’s total displacement, providing excellent stability and allowing the boat to carry a generous sail plan. This design gives sailors a confident, balanced platform while maintaining smooth motion on the water.
Designed with leisure and family outings in mind, the cockpit is spacious enough to easily accommodate friends and crew for weekend trips. Tiller steering comes standard, but a wheel steering option is also available, which is an unusual feature for a boat in this trailerable class. Inside, the vessel functions effectively as a weekender, offering accommodations to sleep four adults across forward and aft double berths. The interior layout features a functional galley equipped with a sink, stove, icebox, and a 10-gallon freshwater capacity, alongside a teak folding dining table, fabric interior cushions, and an enclosed head area with a portable toilet.
The sailboat is outfitted with a comprehensive set of standard rigging and deck hardware aimed at easy handling and trailering. Key features include a fractional rig with struts, internal halyards led directly to the cockpit, a mast raising system, a mast crutch for transport, a kick-up rudder, a hinged seahood, an outboard engine bracket, and a walk-through transom with a stainless steel swim ladder. Construction featured a fiberglass hull covered by a limited five-year structural and bottom blister warranty, along with a moulded-in non-skid deck, stainless steel bow pulpit, and lifelines for added safety.
In addition to standard equipment, a wide range of optional add-ons and upgrades are available to customize the boat. Owners can opt for a bimini top, companionway canvas, cockpit cushions, stern rail seats, accordion shades, a 12V cooler, an upgraded marine head with a holding tank, an anchor roller, and ST-40 knot and depth instrumentation. For transport, a galvanized dual-axle trailer built to U.S. standards with single-axle brakes and a tongue jack is offered. Note, the boat may require a oversize towing permit as the beam exceeds 2.5 metres.
Specifications:
– Length Overall (LOA): 24′ 6″ (7.47 m)
– Hull Length: 24′ 2″ (7.36 m)
– Waterline Length (LWL): 22′ 1″ (6.72 m)
– Beam: 8′ 5″ (2.58 m)
– Draft (Keel): 2′ 0″ (0.61 m)
– Draft (Rudder Down): 2′ 6″ (0.76 m)
– Displacement: 3,700 lb (1,678 kg)
– Ballast: 1,309 lb (594 kg)
– Mast Height (Standard): 31′ 8″ (9.65 m)
– Sail Area: 239 sq ft (22.2 sq m)
– Freshwater Capacity: 10 gal (38 L)
– Porta Potti Tank Capacity: 2.8 gal (10.5 L)
– Optional Holding Tank Capacity: 13 gal (49 L)
– Maximum Power: 10 hp (7.46 kW)
– Maximum Capacity: 8 people
Source: John Crawford Marine. “Hunter 25” Trailer Sailer Library. Accessed October 30, 2026.
https://www.johncrawfordmarine.com.au/advice/trailer-sailer/hunter-25
Photograph reproduced for identification and historical research purposes. Copyright remains with the original rights holder.
Quick tip: Keep in mind that trailer sailers can vary quite a bit, even within the same class. Take the RL28, for example: they might not all have outboard wells as designed. Some originally may have had inboard engines, and when those were removed, the owners swapped them for a standard outboard mounted on the stern.
