The Eclipse 17, a rare trailer sailer, was designed through a joint effort between naval architects Ian Lechmere and Peter Joubert. Marketed by Purvis Cars Pty. Ltd. as the exclusive distributor for Australia and New Zealand, the boat is constructed by Purvis Fibre Glass Products, a manufacturer known for high-quality builds such as the Purvis Eureka Sports Car. Built primarily to meet the needs of families, the yacht combines ease of maintenance and low operational costs with dynamic, lively performance on the water.
A key design focus of the Eclipse 17 T.S. was capturing the sleek, continuous deck and cabin lines typically seen on larger offshore racing vessels rather than standard trailer sailers. This aesthetic design is further enhanced by custom-cast bow fittings with integrated fairleads, spring pins, and transom corner pieces featuring backstay tangs. Visually, the vessel features a two-tone colour arrangement complemented by accent striping, along with a comprehensive selection of standard features that are usually offered as paid additions on competing models.
The interior features a four-berth layout outfitted with cushioned seating and bedding. Access into the main cabin is streamlined thanks to a wide companionway entry that reaches forward into the coach roof. Additionally, an oversized forward hatch allows for convenient handling and storage of gear and sails. To give owners flexibility in customizing their vessel, interior amenities such as curtains, cooking equipment, and appliances are offered as optional extras.
For sailing performance, the rig handles a total working sail area of 120 square feet, consisting of a 65-square-foot mainsail and a 55-square-foot jib, with an optional 80-square-foot Genoa available for light wind conditions. The boat is outfitted with high-quality rigging hardware, including two top-tier Meissner headsail winches situated for easy single-handed operation, with halyards routed directly to the cockpit. Designed for rapid setup and launch, the yacht can be fully rigged and launched from its trailer in approximately 10 minutes once familiar with the process.
SPECIFICATIONS:
* Model Name: ECLIPSE 17 T.S.
* Designers: Ian Lechmere and Peter Joubert
* Manufacturer: Purvis Fibre Glass Products
* Distributor/Agent: Purvis Cars Pty. Ltd. (Sole agents for Australia & New Zealand)
* Length Overall (L.O.A.): 17’0″
* Length Waterline (L.W.L.): 15’6″
* Beam: 6’3″
* Draft: 12″ (centreboard up) to 4’0″ (centreboard down)
* Total All-Up Weight: 1,000 lbs (varies slightly based on final options)
* Standard Sail Area:
– Main: 65 sq. ft.
– Jib: 55 sq. ft.
– Total Working Sail Area: 120 sq. ft.
* Optional Sail:
– Genoa: 80 sq. ft.
Source: John Crawford Marine. “Eclipse 17” Trailer Sailer Library. Accessed October 28, 2026.
https://www.johncrawfordmarine.com.au/advice/trailer-sailer/eclipse-520
Photograph reproduced for identification and historical research purposes. Copyright remains with the original rights holder.
Quick tip: Keep in mind that trailer sailers can vary quite a bit, even within the same class. Take the RL28, for example: they might not all have outboard wells as designed. Some originally may have had inboard engines, and when those were removed, the owners swapped them for a standard outboard mounted on the stern.
