You are currently viewing MASRM 720

MASRM 720

  • Post author:
  • Post published:
  • Post category:23 Feet

The MASRM 720 (also designated as the Formula 720) is a high-performance trailer sailer that was produced by Merv Anderson of Sandgate Road Marine in Brisbane, Queensland. The name itself is an acronym derived from Merv Anderson Sandgate Road Marine. Built direct from the manufacturer without an external dealer network, the 7.2-meter vessel combines top-tier racing capabilities with the practical amenities needed for comfortable family cruising. Designed with a lightweight foam-core construction using Divinycell contoured foam and hand laid-up glasswork, the boat keeps labour costs and overall weight significantly lower than conventional trailer sailers of similar size. This light displacement design features a deep forefoot, a fine entry transitioning to a fairly flat aft section, a shallow skeg for tracking stability, and a vertical lift daggerboard keel carrying all the ballast. The keel can be easily raised using a mechanical winch system, while the daggerboard-style rudder sits within a sturdy aluminium frame.

On the water, the sailboat exhibits exceptional speed and pointing ability. Under light to moderate breezes, it comfortably reaches around six knots to windward, benefiting from its balanced proportions and limited wetted surface. While it can be slightly tender under heavy wind, ideally suited for a racing crew of four hiking out on deck, it remains easily manageable and tracks remarkably well across all points of sail. All halyards and main control lines run directly back to winches and jammers on the cabin top, making spinnaker handling and sail adjustments simple even for small crews. The rig configuration includes a fully battened, loose-footed main, swept-back spreaders, and a block-and-tackle backstay adjuster, available in both a standard cruising setup and a taller racing rig with runners.

Despite its racing pedigree, the vessel offers generous interior accommodation owing to its full-bodied hull shape. The cabin features a large pop-top section and sliding hatch for ample headroom. Inside, the layout is organized around the central keel case, offering a forward double berth, two long quarter berths that double as settees, and a portside galley equipped with a spirit stove and sink. The self-draining cockpit is thoughtfully proportioned with comfortable seating distances, low coamings for hiking, stern storage lockers, and integrated transom planing boards that double as boarding steps when the boat is on its trailer.

SPECIFICATIONS:

* Name / Model: MASRM / Formula 720

* Designer / Builder: Merv Anderson (Sandgate Road Marine)

* Length Overall (LOA): 7.2 m

* Length Waterline (LWL): 6.3 m

* Beam: 2.49 m

* Draft: 30 cm (Keel Up) / 160 cm (Keel Down)

* Dry Weight: 900 kg

* Ballast: 240 kg (Lead)

* Sail Area: 30 sq m

* Construction: Divinycell foam-cored fiberglass

Source: John Crawford Marine. ā€œMASRMā€ Trailer Sailer Library. Accessed November 1, 2026.

https://www.johncrawfordmarine.com.au/advice/trailer-sailer/masrm

Photograph reproduced for identification and historical research purposes. Copyright remains with the original rights holder.

Quick tip: Keep in mind that trailer sailers can vary quite a bit, even within the same class. Take the RL28, for example: they might not all have outboard wells as designed. Some originally may have had inboard engines, and when those were removed, the owners swapped them for a standard outboard mounted on the stern.