The Clipper 21 (or CM21) stands out in the trailer sailer market due to its distinct, stylish design that draws heavy inspiration from larger ocean yachts. Introduced to the Australian market by Coast Catamarans after originating in the United States, the vessel breaks away from the conventional “ducky” appearance typical of many small trailer sailers. Its defining feature is a sweeping, flared clipper bow reminiscent of a 40 to 50-foot yacht, providing a sleek profile that attracts significant attention at boat shows and on the water.
During performance and sea testing under harsh conditions with south-westerly wind gusts reaching 25 to 30 knots, the Clipper 21 demonstrated remarkable stability and structural integrity. Even when a faulty cam cleat caused the mainsheet to jam, forcing the vessel to take the full force of a heavy gust broadside, the boat righted itself swiftly without capsizing. The self-bailing cockpit efficiently cleared the water taken over the coaming, and the vessel remained completely manageable with minimal heel and responsive control. Its retractable 480 lb swing keel and wide beam in the aft section contribute significantly to its anti-capsizing capability, overcoming the historical reputation for instability common among trailer sailers.
The interior layout of the Clipper 21 is thoughtfully arranged to maximize space and utility for a family of four. An innovative forward V-berth features a lifting seat back that converts the sleeping area into a comfortable, three-person settee for socializing. Accommodation is further supported by two adult-sized quarter berths. Dual side counters provide dedicated workspace suitable for a galley sink, stove, and storage, alongside dedicated space for an optional marine toilet. A notable design feature is the oversized, sliding companionway hatch, which opens past the mast to enhance airflow, headroom, and accessibility, effectively turning the cockpit into an extended living area when used as a land caravan under an awning.
The sailboat features standard equipment such as aluminum spars, standing and running rigging, sheet winches, a bow pulpit, rudder, tiller, and interior cushions. Safety is a primary design focus, incorporating positive foam flotation in built-in tanks forward and aft as well as under the sole, ensuring the vessel remains buoyant even if fully swamped. For auxiliary power, the motor well is cleanly recessed into the transom, accommodating outboard motors up to 9.9 hp capable of keeping aboard electronics charged while underway.
Specifications:
• Length Overall (LOA): 6.36 m
• Waterline Length (LWL): 5.44 m
• Beam: 2.21 m
• Minimum Draft (Keel Up): 0.23 m
• Maximum Draft (Keel Down): 1.32 m
• Keel Ballast: 217 kg
• Total Displacement: 815 kg
• Total Sail Area: 183 sq. ft.
• Mainsail Area: 96 sq. ft.
• Jib / Foretriangle Area: 96.5 sq. ft.
• Genoa Area: 100 sq. ft.
• Berths: 4 person capacity (2 quarter berths, convertible V-berth/settee)
• Manufacturer / Distributor: Stoddart Bros. Marine Pty. Ltd. (Lytton, QLD) / Coast Catamarans
Source: John Crawford Marine. “Clipper 21” Trailer Sailer Library. Accessed October 24, 2026. https://www.johncrawfordmarine.com.au/advice/trailer-sailer/clipper-21
Photograph reproduced for identification and historical research purposes. Copyright remains with the original rights holder.
Quick tip: Keep in mind that trailer sailers can vary quite a bit, even within the same class. Take the RL28, for example: they might not all have outboard wells as designed. Some originally may have had inboard engines, and when those were removed, the owners swapped them for a standard outboard mounted on the stern.
