You are currently viewing Sea Bita 19

Sea Bita 19

  • Post author:
  • Post published:
  • Post category:19 Feet

The Sea Bita is a retractable keel trailer sailer that was manufactured by Marine Craft, Victoria. Designed for versatile coastal and inland sailing, the vessel features a glass-reinforced plastic (GRP) hull constructed with gun roving and woven roving up to the waterline. For safety and convenience on the water, the yacht is equipped with both a self-draining anchor well and a self-draining cockpit.

Marine Craft offered the Sea Bita across four progressive stages of assembly, allowing buyers to choose their desired level of completion. Stage 1 provided the basic hull and deck structure (unbonded) along with the keel plate case, main bulkheads, timber transom, deck members, anchor well, hatch, and an unweighted keel structure. Stage 2 added interior furniture, keel lifting gear, chain plates, rudder pintles, an outboard bracket, a bow eye fitting, a companionway hatch, a deck bonded with a timber gunwale, and a flowcoated interior GRP finish. Stage 3 brought the vessel to a basic sailing status by introducing a coloured mast and boom, stainless steel standing rigging, an adjustable backstay, a jib tensioner, internal halyards, two Barlow sheet winches, running rigging, a rudder assembly, cabin grab rails, windows, and standard sails (main and jib). Finally, Stage 4 delivered a fully completed package featuring bunk cushions, pulpit, pushpit, safety lines, navigation and cabin lights, a fitted bilge pump, and custom boat signwriting.

In addition to the standard assembly stages, buyers could customize their vessel with a variety of optional factory extras and accessories. Transportation options included several trailer models in both single and tandem axle configurations, with or without brakes. Extra sail options included a genoa as well as a two-colour radial head spinnaker. Interior and convenience upgrades encompassed a pre-cut furniture kit for Stage 1 builds, custom interior furniture alterations, a two-burner methylated spirits stove, a Porta Potti portable toilet, and optional decorative striping or masking.

SPECIFICATIONS:

* Manufacturer: Marine Craft, Victoria

* Model Type: Retractable Keel Yacht

* Overall Length: 19′ (5.79 m)

* Length at Waterline (L.W.L.): 17′ 3″ (5.26 m)

* Beam: 7′ 5″ (2.26 m)

* Draft (Keel Up): 9″ (0.23 m)

* Draft (Keel Down): 3′ 4″ (1.02 m)

* Total Displacement: Approx. 1,500 lbs (680 kg)

* Ballast Weight: 550 lbs (249 kg)

* Mast Height Above Coach House: 23′ (7.0 m)

* Main Sail Area: 85 sq. ft. (7.89 m²)

* Jib Sail Area: 95 sq. ft. (8.82 m²)

* Genoa Sail Area: 126 sq. ft. (11.70 m²)

* Spinnaker Sail Area: 260 sq. ft. (24.15 m²)

* Deck & Cockpit Features: Self-draining anchor well and self-draining cockpit

Source: John Crawford Marine. “Sea Bita 19” Trailer Sailer Library. Accessed November 4, 2026.

https://www.johncrawfordmarine.com.au/advice/trailer-sailer/seabita

Photograph reproduced for identification and historical research purposes. Copyright remains with the original rights holder.

Quick tip: Keep in mind that trailer sailers can vary quite a bit, even within the same class. Take the RL28, for example: they might not all have outboard wells as designed. Some originally may have had inboard engines, and when those were removed, the owners swapped them for a standard outboard mounted on the stern.