You are currently viewing Adams 21

Adams 21

  • Post author:
  • Post published:
  • Post category:21 Feet

The Adams 21 is a trailer sailer engineered with a ballasted fixed shoal keel beneath the hull that carries its lead weight, ensuring maximum form stability alongside fine bow lines, flattish sections, and a wide stern. Originally marketed as the Seahorse 6, the boat’s moulds were acquired after production ceased by owner Frank Downing, who preserved the hull, deck, and rig while redesigning the cabin to better accommodate family cruising. Well-constructed by Jarkan Yachts in Nowra on the New South Wales south coast, the vessel features a firm bilge, flat floors, and a wide run that provides excellent stability and support for a full cockpit of passengers. The shallow keel houses both the ballast and the light-weight timber lead-weighted fin centreboard, which is easily operated via a simple lifting mechanism. Because the ballast resides in the keel, the vessel retains stability even when the centreboard is fully raised, while the lifting timber rudder facilitates beaching and shallow-water navigation. 

The three-quarter rig design features a lowered jib that reduces heeling forces and allows for a lighter, more flexible mast section. Equipped with 20.53 square metres of total sail area, the yacht handles light winds efficiently, picking up speed rapidly during gusts and maintaining momentum. Under power, a six-horsepower outboard motor mounted directly to the custom-designed transom provides ample propulsion, eliminating the need for external mounting brackets. A cut-away section on the starboard side of the cockpit allows the motor to clamp and swing upward easily, alongside dedicated space for an outboard fuel tank, though general cockpit storage remains otherwise minimal. The cockpit itself measures 1.95 metres long and is set below deck height with a low coaming to protect seating from spray while keeping movement easy across the low deckhouse.

Below deck, the cabin layout eliminates the intrusive centreboard case found in many trailer sailers, allowing for a open 1.5-metre saloon with ample floor space where five adults can sit comfortably without cramped knees. Accommodation includes two long settee berths in the main saloon and two forward V-berths separated by a half-bulkhead, with space for a chemical toilet beneath the V-berths and an optional filler cushion to create a large double bed. A forward galley unit equipped with a stove, sink, and storage lockers sits adjacent to the bulkhead, and an anchor locker is integrated directly into the foredeck. Overall, the Adams 21 delivers a solid, stable, and reassuring ride on the water, balancing sleek lines with high displacement for dependable performance and safety.

Specifications:

* Length Overall (L.O.A.): 6.45 m (21 ft 2 in)

* Length Waterline (L.W.L.): 5.33 m (17 ft 6 in)

* Beam: 2.41 m (7 ft 11 in)

* Draft (Board Up / Min): 0.46 m (1 ft 6 in)

* Draft (Board Down / Max): 1.22 m (4 ft 0 in)

* Displacement: 891 kg (1,964 lb)

* Total Sail Area: 20.53 sq. m (221 sq. ft.)

* Mainsail Area: 12.35 sq. m (133 sq. ft.)

* No. 1 Genoa Area: 12.54 sq. m (135 sq. ft.)

* No. 2 Genoa Area: 9.85 sq. m (106 sq. ft.)

* No. 3 Genoa Area: 6.74 sq. m (72.5 sq. ft.)

* Recommended Power: 6 H.P. outboard motor

* Berths: 4 (2 saloon settee berths, 2 forward V-berths)

* Cockpit Length: 1.95 m (6 ft 4 in)

Source: John Crawford Marine. “Adams 21.” Trailer Sailer Library. Accessed October 18, 2026. https://www.johncrawfordmarine.com.au/advice/trailer-sailer/adams-21.

Historical photograph reproduced for identification and historical research purposes. Copyright remains with the original rights holder.

Quick tip: Keep in mind that trailer sailers can vary quite a bit, even within the same class. Take the RL28, for example: they might not all have outboard wells as designed. Some originally may have had inboard engines, and when those were removed, the owners swapped them for a standard outboard mounted on the stern.